Consulta Bangho MAX G04 I1 (PN: G0406) - Se apaga a los segundos

[sergludmila 59]

Look at the microcircuit modes, visually the integrity of resistors and capacitors

[sergludmila 59]

I do not exclude that the problem is also KBC-ITE IT8587E

[sergludmila 59]

Run the test program (AIDA, Everest) and look at the temperature sensors. Editado 5 de Septiembre del 2023 por sergludmila

[sergludmila 59]

And if you remove the HDD and go to Setup BIOS, how long will it work?

[sergludmila 59]

Have you tried booting from LiveCD (WinPE) without a hard drive?

[pcp04 1.381]

@pcp04 gracias por el consejo, ahora veo con AIDA y te digo que veo, en el tema de limpiar la region ME deberia tomar un backup de la BIOS y tratar de limpiarlo previo a flashearlo?

[Thanks for the advice, let'me check with AIDA and get back to you, to clean the ME region I should take a dump from the actual BIOS and try to clean it before flashing it back, am I right?]

 

@sergludmila, I did take messures to ensure there is no bad contact and stuff, although I thought about the ESD discharge. I did try the initial hdd, it does the same. It turns off both with battery and ac connected, I did not yet check to disconnect the power button after turning it on, but will also try

Haces una copia/dump del Bios de la notebook, a este archivo binario le haces el clear Me y luego reprogramas el Bios con este archivo.

Si querés subí el dump del Bios y yo realizo el clear Me del bios